The advantages of U-shaped piles are multiple:
Ø wide range of sections forming several series with various geometrical characteristics, enabling the choice of technically
and economically optimized sections for each specific project. Our regular stock for U type hot rolled sheet piles are over 80,000 tons
Ø combination of great wave depth and high flange thickness leading to excellent statical properties
Ø symmetrical form of single elements resulting in great aptitude for re-use.
Ø possibility of assembling and fixing piles into pairs at the mill providing better installation quality and performance

Rebar is a common name for hot-rolled ribbed steel bars. The grade of ordinary hot-rolled steel bar consists of HRB and the minimum yield point of the grade. H, R, and B are the initials of three words: Hotrolled, Ribbed, and Bars. Reinforcing bars are ribbed steel bars on the surface, also known as ribbed steel bars. Usually, there are two longitudinal bars and transverse bars evenly distributed along the length. The shapes of transverse ribs are spiral, herringbone and crescent.

Carbon steel bar is a long strip of steel with a solid cross section. Its specifications are expressed in millimeters in diameter. They are divided into three types: hot-rolled, forged, and cold-drawn. The hot-rolled specifications are 5.5-250 mm. They are often used as steel bars, bolts, and various Mechanical parts, round steel larger than 25 mm is mainly used to manufacture mechanical parts and seamless steel tube billets.

The carbon steel seamless steel pipe is made of a whole piece of metal and has no seam on the surface.According to the production method,seamless pipes are divided into hot tube, cold-rolled pipe, cold-drawn pipe, extruded pipe, pipe jacking and so on. The carbon seamless steel pipes are mainly used as drilling pipes for petroleum geology, cracking pipes for petrochemical industry, boiler tubes, bearing pipes and high-precision structural steel pipes for automobiles, tractors and aviation.

The cold-rolled silicon steel strip has the characteristics of flat surface, uniform thickness, high stacking coefficient, good blanking, and higher magnetic sensitivity and lower iron loss than the hot-rolled silicon steel strip. A motor or transformer manufactured with cold strip instead of hot rolled strip can reduce its weight and volume by 0% to 25%. If the cold-rolled oriented strip is used, the performance is better. By replacing the hot-rolled strip or the low-grade cold-rolled strip, the power consumption of the transformer can be reduced by 45%-50%, and the transformer performance is more reliable.

The cold-rolled silicon steel strip has the characteristics of flat surface, uniform thickness, high stacking coefficient, good blanking, and higher magnetic sensitivity and lower iron loss than the hot-rolled silicon steel strip. A motor or transformer manufactured with cold strip instead of hot rolled strip can reduce its weight and volume by 0% to 25%. If the cold-rolled oriented strip is used, the performance is better. By replacing the hot-rolled strip or the low-grade cold-rolled strip, the power consumption of the transformer can be reduced by 45%-50%, and the transformer performance is more reliable.

The cold-rolled silicon steel strip has the characteristics of flat surface, uniform thickness, high stacking coefficient, good blanking, and higher magnetic sensitivity and lower iron loss than the hot-rolled silicon steel strip. A motor or transformer manufactured with cold strip instead of hot rolled strip can reduce its weight and volume by 0% to 25%. If the cold-rolled oriented strip is used, the performance is better. By replacing the hot-rolled strip or the low-grade cold-rolled strip, the power consumption of the transformer can be reduced by 45%-50%, and the transformer performance is more reliable.

The cold-rolled silicon steel strip has the characteristics of flat surface, uniform thickness, high stacking coefficient, good blanking, and higher magnetic sensitivity and lower iron loss than the hot-rolled silicon steel strip. A motor or transformer manufactured with cold strip instead of hot rolled strip can reduce its weight and volume by 0% to 25%. If the cold-rolled oriented strip is used, the performance is better. By replacing the hot-rolled strip or the low-grade cold-rolled strip, the power consumption of the transformer can be reduced by 45%-50%, and the transformer performance is more reliable.

Unoriented electrical steel is a soft magnetic alloy of ferrosilicon with very low carbon content. It is an indispensable material in power, electronics and military industries. Non-oriented silicon steel is the core material of the rotor of motor and generator working in rotating magnetic field, which requires good magnetic properties and technological properties.